HomePage Forums V10,000 Call Blocker Alternate Programming Code

This topic contains 0 replies, has 1 voice, and was last updated by  cprsupport 11 months, 4 weeks ago.

Viewing 1 post (of 1 total)
  • Author
  • #1357

    If your CPR Call Blocker is set up using the Standard (IN SERIES) Set up and you are not able to get your programming codes to work, please start your codes with:

    # * 7 (rest as normal)

    instead of * * 7

    This should resolve any programming issues you are facing.  If however this method still does not resolve the issue, please get a dial tone (over speaker phone), then,

    Press and hold the BLOCK NOW button down for 5 – 10 seconds until it beeps, hang up the call.

    Then try the alternate programming methods again.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.