HomePage Forums Call Blocker Set Up Guides Protect + Programming guide

Topic Resolution: Not a Question

This topic contains 0 replies, has 1 voice, and was last updated by  cprsupport 2 years, 2 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #988

    ONLY FOR CPR CALL BLOCKER PROTECT + CUSTOMERS

    TO WHITE LIST NUMBERS (ADD THEM TO THE ALLOWED TO CALL LIST)

    White list by getting a dial tone and enter * * 8 #  number #  hang up.

    You will hear a beep after each # is entered.

    Black list (Block) Get a dial tone & enter * * 6 # number # hang up.

    You will hear a beep after each # is entered.

    Please note the Protect + is already turned on by default (blocks all calls)

    To turn this on, get a dial tone and enter * * 4 # * 4 #  hang up

    To turn this off get a dial tone and enter * * 3 #  * 3 #  hang up

    You will hear a beep after each # is entered.

    this will allow all calls through i.e. everything will be white listed.

    ALLOW OR BLOCK WITHHELD/PRIVATE CALLS

    TO White list (ALLOW) –  Get a dial tone & enter * * 8 #  7 * #  hang up

    TO Black List (BLOCK) – Get a dial tone & enter * * 6 # 7 * # hang up

    You will hear a beep after each # is entered.

    ALLOW OR BLOCK UNAVAILABLE /UNKNOWN CALLERS

    To White List (Allow) – Get a dial tone & enter * * 8 # #  hang up

    To Black List (Block) – Get a dial tone & enter * * 6 # #  hang up

    You will hear a beep after each # is entered.

    ALLOW OR BLOCK INTERNATIONAL/OUT OF AREA CALLS

    To White List (Allow) – Get a dial tone & enter * * 8 # * # hang up

    To Black List (Block) – Get a dial tone & enter * * 6 # * #  hang up

    You will hear a beep after each # is entered.

    ALLOW OR BLOCK  VOIP/IP ROGUE DIALLERS

    To White List (Allow) – Get a dial tone & enter * * 8 # 6 * #  hang up

    To Black List (Block) – get a dial tone & enter * * 6 #  6 * # hang up

    You will hear a beep after each # is entered.

    ALLOW OR BLOCK SINGLE DIGIT SPOOF CALLS

    To White List (Allow) – Get a dial tone & enter * * 8 # 0 # hang up

    To Black List (Block) – Get a dial tone & enter * * 6 # 0 # hang up

    You will hear a beep after each # is entered.

    TO RESET THE CALL BLOCKER TO FACTORY SETTINGS

    Get a dial tone and enter * * 1 # * 1 #  and hang up

     

     

     

     

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.