HomePage Forums Call Blocker Set Up Guides Setting up CPR Call Blocker on a 2 Line System

Topic Resolution: Not a Question

This topic contains 0 replies, has 1 voice, and was last updated by  cprsupport 2 years, 4 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #650

    The CPR Call Blocker is designed to work on a single line

    If you would like to attach the CPR Call Blocker to a 2 line system you will need to split the lines with a line splitter that separates each line, then connect the CPR Call Blocker to the line you wish to block on (if you wish to block calls on each lines you will need 1 CPR Call Blocker PER LINE)

    We recommend the following splitter;
    http://www.amazon.com/gp/product/B000E9U9MG/

    Use the splitter like the one recommended above, connect this to the WALL JACK directly, then connect from the L1 jack on the splitter (NOT L1/L2) to the LINE jack of the CPR Call Blocker, then connect from the TEL jack of the CPR Call Blocker to the Line 1 or Line1/2 jack on the phone, then if you do not need to block calls on Line 2, simply connect a second cable from the L2 jack of the splitter to the Line 2 jack on the phone

    If you DO need to block calls on the second line, you will need a second call blocker, you should then connect a cable from L2 on the splitter to the LINE jack of the second CPR Call Blocker and a cable from the TEL jack of the second blocker to the Line 2 jack of the phone

    The diagrams below should help with this set up;
    2 Line set up if you need to block calls on BOTH lines

    2 Line set up if you only need to block on ONE line

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.